Copyright 2024 - CSIM - Asian Institute of Technology

[Date Prev] [Date Next] [Thread Prev] [Thread Next] [Date Index] [Thread Index]

Subject: FreeBSD Security Advisory FreeBSD-SA-02:23.stdio
From: FreeBSD Security Advisories <This email address is being protected from spambots. You need JavaScript enabled to view it.>
Date: Mon, 22 Apr 2002 11:01:35 -0700 (PDT)

-----BEGIN PGP SIGNED MESSAGE-----

=============================================================================
FreeBSD-SA-02:23.stdio                                      Security Advisory
                                                          The FreeBSD Project

Topic:          insecure handling of stdio file descriptors

Category:       core
Module:         kernel
Announced:      2002-04-22
Credits:        Joost Pol <This email address is being protected from spambots. You need JavaScript enabled to view it.>
Affects:        All releases of FreeBSD up to and including 4.5-RELEASE
                4.5-STABLE prior to the correction date
Corrected:      2002-04-21 13:06:45 UTC (RELENG_4)
                2002-04-21 13:08:57 UTC (RELENG_4_5)
                2002-04-21 13:10:51 UTC (RELENG_4_4)
FreeBSD only:   NO

I.   Background

By convention, POSIX systems associate file descriptors 0, 1, and 2
with standard input, standard output, and standard error,
respectively.  Almost all applications give these stdio file
descriptors special significance, such as writing error messages to
standard error (file descriptor 2).

In new processes, all file descriptors are duplicated from the parent
process.  Unless these descriptors are marked close-on-exec, they
retain their state during an exec.

All POSIX systems assign file descriptors in sequential order,
starting with the lowest unused file descriptor.  For example, if a
newly exec'd process has file descriptors 0 and 1 open, but file
descriptor 2 closed, and then opens a file, the new file descriptor is
guaranteed to be 2 (standard error).

II.  Problem Description

Some programs are set-user-id or set-group-id, and therefore run with
increased privileges.  If such a program is started with some of the
stdio file descriptors closed, the program may open a file and
inadvertently associate it with standard input, standard output, or
standard error.  The program may then read data from or write data to
the file inappropriately.  If the file is one that the user would
normally not have privileges to open, this may result in an
opportunity for privilege escalation.

III. Impact

Local users may gain superuser privileges.  It is known that the
`keyinit' set-user-id program is exploitable using this method.  There
may be other programs that are exploitable.

IV.  Workaround

None.  The set-user-id bit may be removed from `keyinit' using the
following command, but note that there may be other programs that can
be exploited.

# chmod 0555 /usr/bin/keyinit

V.   Solution

1) Upgrade your vulnerable system to 4.5-STABLE; or to either of the
RELENG_4_5 (4.5-RELEASE-p4) or RELENG_4_4 (4.4-RELEASE-p11) security
branches dated after the respective correction dates.

2) To patch your present system:

a) Download the relevant patch from the location below, and verify the
detached PGP signature using your PGP utility.

# fetch ftp://ftp.FreeBSD.org/pub/FreeBSD/CERT/patches/SA-02:23/stdio.patch
# fetch ftp://ftp.FreeBSD.org/pub/FreeBSD/CERT/patches/SA-02:23/stdio.patch.asc

b) Execute the following commands as root:

# cd /usr/src
# patch < /path/to/patch

c) Recompile your kernel as described in
http://www.freebsd.org/handbook/kernelconfig.html and reboot the
system.

VI.  Correction details

The following list contains the revision numbers of each file that was
corrected in FreeBSD.

Path                                                             Revision
  Branch
- -------------------------------------------------------------------------
sys/sys/filedesc.h
  RELENG_4                                                       1.19.2.4
  RELENG_4_5                                                 1.19.2.3.6.1
  RELENG_4_4                                                 1.19.2.3.4.1
sys/kern/kern_exec.c
  RELENG_4                                                     1.107.2.14
  RELENG_4_5                                               1.107.2.13.2.1
  RELENG_4_4                                                1.107.2.8.2.2
sys/kern/kern_descrip.c
  RELENG_4                                                      1.81.2.11
  RELENG_4_5                                                 1.81.2.9.2.1
  RELENG_4_4                                                 1.81.2.8.2.1
sys/conf/newvers.sh
  RELENG_4_5                                                1.44.2.20.2.5
  RELENG_4_4                                               1.44.2.17.2.10
- -------------------------------------------------------------------------

VII. References

PINE-CERT-20020401 <URL:http://www.pine.nl/advisories/pine-cert-20020401.txt>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.6 (FreeBSD)
Comment: For info see http://www.gnupg.org

iQCVAwUBPMRPoFUuHi5z0oilAQE0/AP/R2qPI5bI2XIFgQ6FL+m4rUZ7M6VQzZqY
yzGskbEkG2LKTYPFQ/FF+Tx6ffbMicnyrTTvDcJ3F9lmKRNvPBVaOuiNBjkrLdQc
rerg2aHSJunQCkcd7f/+RjxtWO8wbjTM9TXmc8X1G9kJGaglCwEfHkZJzmsyGDyD
qjkDToXu9a8=
=oXDh
-----END PGP SIGNATURE-----

This is the moderated mailing list freebsd-announce.
The list contains announcements of new FreeBSD capabilities,
important events and project milestones.
See also the FreeBSD Web pages at http://www.freebsd.org


To Unsubscribe: send mail to This email address is being protected from spambots. You need JavaScript enabled to view it.
with "unsubscribe freebsd-announce" in the body of the message

Powered by: MHonArc

Login Form

Search

School of Engineering and technologies     Asian Institute of Technology